[2023] Pass Salesforce OmniStudio-Developer Exam in First Attempt Easily
The Most Efficient OmniStudio-Developer Pdf Dumps For Assured Success
Salesforce OmniStudio platform is a powerful tool that enables developers to create and deploy customized solutions quickly and easily. The platform includes a variety of development tools, including Apex, Visualforce, and Lightning components, as well as pre-built templates and components that can be customized to meet specific business needs.
Salesforce OmniStudio-Developer Certification Exam is a highly respected certification that demonstrates the candidate's expertise and proficiency in building custom applications on the Salesforce platform using OmniStudio. It is a valuable credential for developers who want to enhance their career prospects and demonstrate their expertise to potential employers. Successful completion of the Salesforce OmniStudio-Developer Certification Exam is also a prerequisite for certain advanced certifications, such as the Salesforce Certified Technical Architect (CTA) certification.
NEW QUESTION # 21
A developer is configuring a DataRaptor Load to Save contract dat
a. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?
- A. Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.
- B. Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.
- C. Check is Lookup property when mapping the fields.
- D. Add Link to RecordType object in the Contact Object with the id field of RecordType object.
Answer: B,C
NEW QUESTION # 22
When an OmniScript is launched from an Action on a FlexCard, the OmniScript displays, but no Salesforce data is populated.
What error could cause this behavior? Choose 2 answers
- A. In the DataRaptor Extract Action, the Input Parameters Data Source is misspelled.
- B. The Id Field for Actions in the FlexCard is not configured with the correct Recordid.
- C. There is no active version of the OmniScript.
- D. There is no active version of the DataRaptor Extract.
Answer: A,B
NEW QUESTION # 23
CORRECT TEXT
The card layout below has an Integration Procedure as a data source. The cards use the layout data source.
Which JSON data structure below supports this card layout and uses best practices.
- A. "Contact": [
{
"CellPhone": "(212) 154-8562",
"Name": "Edward Stamos"
},
t
"CellPhone". "(650) 156-1102",
"Name": "Howard Jones"
} - B. ""ContactCellPhone: "(212) 154-8562",
"ContactName": "Edward Stamos",
"AccountPhone": "2221546450",
"AccountName": "Acme"
I
{
"ContactCellPhone: "(650) 156-1102",
"ContactName": "Howard Jones",
"AccountPhone": "2221546450",
"AccountName" "Acme"
}
]
Answer: A
NEW QUESTION # 24
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
- B. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
- C. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
- D. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:
Answer: C
NEW QUESTION # 25
In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?
- A. It must be included in constants.
- B. It must be a calculation step.
- C. It must be included in the calculation output.
- D. It must bea matrixlookup step.
Answer: C
Explanation:
Explanation
In a calculation procedure, the output of a calculation step must be included in the calculation output in order to be used in an aggregation step. The calculation output defines the variables that are available for aggregation
NEW QUESTION # 26
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developerconfigure the FlexCard to display the case records in this way?
- A. Disable the Repeat Record feature on the FlexCard setup tab
- B. Enable the Repeat Records feature on the FlexCard Setup tab
- C. Select the Repeatable Mode property on the data table elements
- D. Enable the record Looping feature on the data table elements
Answer: A
NEW QUESTION # 27
Refer to the following row-versioned calculation matrix.
The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, what is the result?
- A. The row is deleted In Versions 2 and 3 but will remain in Version 1.
- B. The row is deleted in Version 3 and Version 1.
- C. The row is delete only in Version 3.
- D. The row is deleted in all versions
Answer: C
NEW QUESTION # 28
Refer to the exhibit below. In this integration production structure, what Send JSON Path would be used to send the Output of the Action1 element to a Remote Action?
- A. BlockB: BlockB. Action1
- B. BlockA: BlockB. Action 1
- C. Action1: BlockB. Block A
- D. Action1. BlockB. Block A
Answer: C
NEW QUESTION # 29
On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label. What could cause this?
- A. There are No test Data test Parameters configured.
- B. In the Setup Pabel, {recordId} is misspelled in the Data Source Input Map.
- C. The field name in the FlexCard state does not match the DataRaptor Extract's Output JSON Path name.
- D. In the FlexCard state, the Field type for the field does not match the type in the Salesforce record.
Answer: A
NEW QUESTION # 30
Refer to the exhibit below. In this Integration Procedure structure, what Send JSON Path would you use to send the output of the ActionZ element to a Response Action?
- A. ActionZ:BlockY:BlockX
- B. BlockX:BlockY:ActionAZ
- C. ActionZ:BlockY:BlockX
- D. BlockX.BlockYActionZ
Answer: B
NEW QUESTION # 31
An OmniScript displays data from an API using Integration Procedure, but some of the data is missing.
Which two configuration errors could cause this? Choose 2 answers
- A. The missing data is trimmed in the Integration Procedure Action Response JSON Path.
- B. The element name for the missing data does not match the JSON node key in the Integration Procedure Response.
- C. The Integration Procedure Preview Input Parameters do not match the JSON sent from the OmniScript.
- D. The JSOW sent from the Integration Procedure Action does not match any of the Original Input for the Integration Procedure
Answer: A,B
NEW QUESTION # 32
Refer to theexhibit.
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION # 33
You are building a DataRaptor Load for an Integration Procedure used in an OmniScript.
Based on best practices, how should you configure the Input JSON?
- A. Build the Input JSON node by node in an editor.
- B. Build the Input JSON node by node in the DataRaptor Designer.
- C. Copy the Input JSON from the DataRaptor Action Debug node.
- D. Copy the Input JSON from the OmniScript {Data} modal.
Answer: D
NEW QUESTION # 34
You want to pass the postalcode attribute from a parent to a child FlexCard.
What do you enter for the Value on the parent FlexCard?
- A. {Params.PostalCode}
- B. {Parent PostalCode}
- C. {params.postaiCode}
- D. {PostalCode}
Answer: A
NEW QUESTION # 35
A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.
The AccountId set in the parent Omniscript is used to another Set Values element ContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.
While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. The flag passDataJSON in the parent OmniScript in not configured correctly.
- B. A developer failed to include a Navigation Element to pass data from the parent OmniScript.
- C. Both parent and embedded OmniScripts have the same element name for the Set values element.
- D. The LWC PubSub Message flag in the Set Values action of the parent has not been set.
Answer: D
NEW QUESTION # 36
A developer is building an OmniScript and needs to retrieve data from a single field in aSalesforce record.
Which OmniScript element does this?
- A. DataRaptor Post Action
- B. HTTP Action
- C. Lookup
- D. Select
Answer: C
Explanation:
Explanation
The Lookup element is used to retrieve data from a single field in a Salesforce record. The Lookup element allows the developer to specify the object, field, and filter criteria for the data retrieval. The Select element is used to display a list of options for the user to choose from. The HTTP Action element is used to send or receive data from an external system using HTTP methods. The DataRaptor Post Action element is used to create or update Salesforce records using a DataRaptor Transform.
NEW QUESTION # 37
A developer needs to display read-only contact information in a OmniScript. The developer will format the information as a table, using merge codes to dynamically include first name, last name, street address, state, postal, code, and country from the data JSON.
Which OmniScript element should the developer use to meet this requirement?
- A. Rich text Area
- B. Edit Block
- C. Text Block
- D. Text area
Answer: C
NEW QUESTION # 38
You are configuring the API URL in an HTTP Action element within an Integration Procedure.
What is the merge code syntax for passing a Date node from an element named SetValues in the URL?
- A. [SetValues' [Date] on
- B. %Setvalues.Date%
- C. {{SetValues. Date} Calculator
- D. %SetValues:Date%
Answer: D
NEW QUESTION # 39
Refer to the exhibit.
What JSON code correct represent the step in the OmniScript Structure panel shown?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Explanation
According to the OmniScript Data JSON page, the OmniScript structure JSON defines the data elements and their properties that are used in an OmniScript. The exhibit shows an OmniScript structure JSON with three elements: Step, Block, and Telephone. The Step element is an empty object, the Block element is an object with two properties: Text and Telephone, and the Telephone element is a string. Therefore, the JSON code that correctly represents the step in the OmniScript Structure panel shown is option C, which has the following structure:
The other options have different structures that do not match the OmniScript structure shown. Therefore, the correct answer is C.
NEW QUESTION # 40
......
We offers you the latest free online OmniStudio-Developer dumps to practice: https://www.examprepaway.com/Salesforce/braindumps.OmniStudio-Developer.ete.file.html
Salesforce OmniStudio-Developer Real Exam Questions Guaranteed Updated Dump: https://drive.google.com/open?id=1fczpSLyjEtRGtg-f_ZW-EugT2L5wBj3w