Free 2021 CCNP Service Provider 350-501 dumps are available on Google Drive shared by ExamPrepAway
Welcome to download the newest ExamPrepAway 350-501 PDF dumps: https://www.examprepaway.com/Cisco/braindumps.350-501.ete.file.html ( 250 Q&As)
NEW QUESTION 95
Refer to the exhibit:
With which router does IOSXRV-1 have LDP session protection capability enabled but session hold up is not active?
- A. 192.168.0.3
- B. 192.168.0.1
- C. 192.168.0.4
- D. 192.168.0.5
Answer: D
NEW QUESTION 96
Refer to the exhibit:
An engineer wants to authenticate the OSPF neighbor between PEA and PE-B using MD5.
Which command on PE-B successfully completes the configuration?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: A
NEW QUESTION 97 
Refer to the exhibit. A network engineer is implementing QoS services. Which two statements about the qos- group keyword on Cisco IOS XR are true? (Choose two.)
- A. QoS group marking occurs on the ingress.
- B. The QoS group numbering corresponds to priority level.
- C. It cannot be used with priority traffic class.
- D. QoS group can be used in fabric QoS policy as match criteria.
- E. It marks packets for end-to-end QoS policy enforcement across the network.
Answer: A,D
Explanation:
Section: Services
Explanation/Reference:
NEW QUESTION 98
Refer to the exhibit:
If router A is the RP, which PIM mode can you configure so that devices will send multicast traffic toward the RP?
- A. PIM-SM
- B. PI MM-DM
- C. BIDIR-PIM
- D. PIM-SSM
Answer: C
NEW QUESTION 99
Which two PHY modes are available to implement an IOS XR Gigabit Ethernet interface interface? (Choose two.)
- A. SONET
- B. LAN
- C. WDWM
- D. MAN
- E. WAN
Answer: A,C
NEW QUESTION 100
Refer to the exhibit:
In which way does router R1 operate differently than router R2?
- A. R1 sends LSA types 1 and 2, while R2 sends type 1. 2. and 7 LSAs
- B. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs
- C. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs
- D. R1 sends LSA type 2 only and R2 sends LSA type 1 only
Answer: A
NEW QUESTION 101
Refer to the exhibit:
This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to identify traps for SNMP polling
- B. It is used to create a subscription to specify the streaming interval
- C. It is used to create a sensor-group and has a list of YANG models for streaming
- D. It is used to identify MIB entries and has a list of YANG models
Answer: C
NEW QUESTION 102
You are testing the capabilities of MPLS OAM ping.
Which statement is true?
- A. An LSP is not required for the reply to reach the ingress MPLS router
- B. MPLS OAM ping works solely with P2P LSPs
- C. MPLS OAM ping works solely with Cisco MPLS TE
- D. An LSP breakage results in the ingress MPLS router never receiving any reply
Answer: D
NEW QUESTION 103 
Refer to the exhibit. In which way does router R1 operate differently than router R2?
- A. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs.
- B. R1 sends LSA type 2 only and R2 sends LSA type 1 only.
- C. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs.
- D. R1 sends LSA types 1 and 2, while R2 sends type 1,2, and 7 LSAs.
Answer: D
Explanation:
Section: Networking
Explanation/Reference:
NEW QUESTION 104
An engineer must extend Layer 2 Between two campus sites connected through an MPLS backbone that encapsulates Layer 2 and Layer 3 data Which action must the engineer perform on the routers to accomplish this task?
- A. Configure QoS for MPLS and E-ACCESS
- B. Configure a pseudowire for E-LINE.
- C. Configure Cisco MPLS TE for use with E-TREE.
- D. Configure a EtherChannel for E-LAN.
Answer: B
NEW QUESTION 105
Refer to the exhibit:
What does this value mean when it is received in XML?
- A. It means a data fie4d is blank
- B. It indicates a value assigned by a network administrator to tag a route
- C. It shows the ending of the script
- D. It indicates a break in a sequence
Answer: A
NEW QUESTION 106
Refer to the exhibit:
A network engineer is implementing a BGP routing policy.
Which effect of this configuration is true?
- A. All traffic is assigned a local-preference of 30O regardless of its destination
- B. All traffic that matches acl10 is allowed without any change to its local-preference
- C. All traffic that matches acl10 is dropped without any change to its local-preference
- D. If traffic matches acl10, it is allowed and its local-preference is set to 300
Answer: B
NEW QUESTION 107
Refer to the exhibit.
An engineer applied a gRPC dial-in configuration on customer's router to provide connection multiplexing and two-way streaming. What does this configuration accomplish in a gRPC?
- A. It specifies the encapsulation that is used tor daily and dial-out.
- B. It specifies the encapsulation pushed by the client.
- C. It specifies the encapsulation pushed by the server.
- D. It excludes the encapsulation types gpbcompact and gpbkv.
Answer: C
NEW QUESTION 108
Refer to the exhibit:
Which statement describes this configuration?
- A. Router 1 has its running configuration locked so changes can be made only when the administrator issues a kill session
- B. Router 1 has a new data store to collect SNMP information, but configuration must still be done at the CLI only
- C. Router 1 can be remotely managed by the CLI using Telnet
- D. Router 1 has a temporary data store where a copy of the running configuration can be manipulated and verified before committing the configuration
Answer: D
NEW QUESTION 109
Refer to the exhibit:
This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows the hostname of the device as rpc-reply
- B. It shows NETCONF uses remote procedure calls.
- C. It shows that the full configuration is being modeled by VANG
- D. It shows that the running configuration is blank
Answer: D
NEW QUESTION 110
Refer to the exhibit. After implementing a new design for the network, a technician reviews the pictured CLI output as part MOP. Which two outcomes will be technician ascertain from the impNull output? (Choose two.)
- A. Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10
- B. Penultimate Hop Popping is in use for the prefix displayed
- C. Ultimate Hop Popping is in use for the prefix displayed.
- D. Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for
192.168.10.10 - E. Label 0 is used for the prefix displayed but will not be part of the MPLS label stack for packets destined for 192 168.10.10.
Answer: A,B
NEW QUESTION 111
Refer to the exhibit:
When implementing an LDP protocol, an engineer experienced an issue between two directly connected routers and noticed that no LDP neighbor exists for 1.1.1.1.
Which factor should be the reason for this situation?
- A. LDP needs to be enabled on the R2 physical interface
- B. LDP needs to be enabled on the R2 loopback interface
- C. R2 sees the wrong type of hellos from R1
- D. R2 does not see any hellos from R1
Answer: D
NEW QUESTION 112
Refer to the exhibit:
Which effect of this configuration is true?
- A. It enables MPLS on the interface
- B. It enables tagging for VLAN 12 on the interface
- C. It enables AToM on interface gigabitethemet1/0
- D. it creates a pseudowire class named Cisco
Answer: C
NEW QUESTION 113
......
Tested Material Used To 350-501: https://www.examprepaway.com/Cisco/braindumps.350-501.ete.file.html
Following are some new 350-501 Real Exam Questions!: https://drive.google.com/open?id=15ZLNZqdJ-6KJKYUmbTSJnxsG4k-1lNE7