H12-831_V1.0-ENU Exam Questions Dumps, Selling Huawei Products
H12-831_V1.0-ENU Cert Guide PDF 100% Cover Real Exam Questions
NEW QUESTION # 65
As shown in the figure, the entire network of a certain company uses OSPF to get through the network. However, RouterS and RouterE cannot establish an OSPF neighbor relationship. When detecting OSPF failures, network administrators can execute the display ospf 100 () interface GEO/0/1 command on RouterS to obtain error-related information. Users can perform OSPF failure diagnosis based on this information. (Please use English lowercase letters to complete the command, and the command cannot be abbreviated)
Answer:
Explanation:
error
NEW QUESTION # 66
As shown in the figure, R1, R2, R3, and R4 are in the same MPLS domain, and LDP is used to allocate MPLS labels between devices. R4 is the FEC Egress LSR of 4.4.4.0/24. If you want to realize that when R1 accesses 4.4.4.0/24, R4 does not need to query the label table but can understand the forwarding priority of the data, then R3's outgoing label for the FEC should be (). (Please fill in the Arabic numerals directly, without symbols)
Answer:
Explanation:
0
NEW QUESTION # 67
The ipv6 enable topology standard is configured in IS-IS protocol view. The meaning of this command is that Pv4 and IPv6 share the same topology.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 68
According to this picture, we can judge:
- A. R4 and ee8c.aOc2.baf3 have established IPv4 and IPv6 IS-IS neighbors
- B. R4 and ee8c.aOc2.bat3 only established IPv4 IS-IS neighbors
- C. R4 does not have any IS-IS neighbors
- D. R4 and ee8c.aOe2.baf3 only established IPv6 IS-IS neighbors
Answer: A
NEW QUESTION # 69
As shown in the figure, network administrator A on the R1 router, after modifying the Local Preference value of the routing entry sent to R2 through the routing policy, can control the path of traffic leaving AS100.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION # 70
The input information of a router is as follows. Which of the following causes the OSPF adjacency cannot be established normally?
- A. Hell. Inconsistent message sending interval
- B. Inconsistent area type
- C. Area code does not match
- D. interfaceIPInconsistent address masks
Answer: A,C
NEW QUESTION # 71
Which of the following functions will affect the establishment of BGP neighbors? (Multiple choice)
- A. BGP authentication
- B. ebgp max hop
- C. BGP GSTM
- D. BGP route filtering
Answer: A,B,C
NEW QUESTION # 72
In OSPFv3, an LSA whose propagation range is one area has_____kind. (Fill in Arabic numerals only)
Answer:
Explanation:
9
NEW QUESTION # 73
According to this picture, we can judge:
- A. R1 has both leve1-1 and level-1-2 link state information
- B. The system ID of R1 is ee8c.a0c2.bafl
- C. R1 only has link state information for leve1-2
- D. In the leve1-2 network, there are a total of 8 routers
Answer: B
NEW QUESTION # 74
Which of the following is not a hardware preparation for cutover?
- A. Cable Continuity Test
- B. Device version check
- C. Test the operation of the board
- D. Power-on test
Answer: B
NEW QUESTION # 75
During the process of viewing the debug output through the SSH terminal, a lot of information pops up. Which of the following operations can make the Moni tor terminal no longer pop up the debug message? (Multiple choice)
- A. Open the notepad, enter undo terminal monitor, copy the command line, and paste it into the Monitor interface
- B. Open the notepad, enter undo debugging all, copy the command line, and paste it into the Monitor interface
- C. Open the notepad, enter undo terminal debugging, copy the command line, and paste it into the Monitor interface
- D. Exit the current Moni tor interface, log in to the device again using SSH to open the new Monitor interface
Answer: C
NEW QUESTION # 76
When there are multiple redundant links in the IS-S network, multiple equal-cost routes may appear. Which of the following statements is false about equal-cost routing within an IS-IS network?
- A. After configuring equal-cost route priorityJS-ISWhen the device forwards the traffic reaching the destination network segment, it will not adopt the load balancing method, but forward the traffic to the next hop with the highest priority
- B. If load sharing is configured, the traffic will be evenly distributed to each link
- C. For each route in the equal-cost route, a priority can be specified, and the route with higher priority will be preferred. the rest as backup routes
- D. When the number of equal-cost routes in the network is greater than the number configured by the command, and these routes have the same priority, Preferred next hop deviceSystem IDLarge routes for load balancing
Answer: A
NEW QUESTION # 77
Configuring DHCP Snooping can be used to prevent imitators from attacking. Which of the following steps should be included in the configuration process? (Multiple choice)
- A. Enable the global DHCP Snooping function
- B. Configure interface trust status
- C. Enable DHCP Snooping on the interface or VLAN
- D. Enable global DHCP function
Answer: A,B,C,D
NEW QUESTION # 78
Regarding the role of ping and tracert, which of the following statements is correct?
- A. Tracert has the same function as ping, but the name is different
- B. Tracert must be able to trace every hop IP address from source to destination
- C. Ping detects the two-way reachability between the correct end and the one-way icmp echo request packet
- D. Ping verifies the reachability from the local end to the opposite end, it does not mean that the opposite end is always reachable to the local end
Answer: D
NEW QUESTION # 79
Which of the following statements about VLAN aggregation is true?
- A. Sub-VLANfor isolating broadcast domains
- B. Sub-VLANContains physical interfaces. Three layers can be builtVLANIFinterface
- C. OneSuper-VLANcan contain one or moreSub-VLAN
- D. Super-VLANOnly physical interfaces cannot establish Layer 3VLANIFinterface
Answer: A,C
NEW QUESTION # 80
......
Upon passing the Huawei H12-831_V1.0-ENU certification exam, candidates will receive a certificate from Huawei Technologies Co. Ltd. HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certification is valid for three years and can be renewed by passing a recertification exam. HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certification provides recognition of the candidate's expertise in advanced routing and switching technologies using Huawei datacom products and can enhance their career prospects in the field of data communication and networking.
The HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certification exam is intended for IT professionals who are responsible for designing, configuring, and troubleshooting complex datacom networks. H12-831_V1.0-ENU exam covers a range of topics, including advanced routing and switching technologies, network security, and network optimization. Individuals who pass the exam are recognized as experts in their field and are well-equipped to tackle the challenges of modern datacom networks.
Huawei H12-831_V1.0-ENU (HCIP-Datacom-Advanced Routing) certification is perfect for IT professionals who are looking to advance their careers in network engineering or network architecture. HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certification is recognized globally and is highly valued in the industry. It is a testament to an individual's mastery of advanced routing technologies and protocols, as well as their ability to design, implement, and maintain complex network environments.
Pass H12-831_V1.0-ENU Exam - Real Questions and Answers: https://www.examprepaway.com/Huawei/braindumps.H12-831_V1.0-ENU.ete.file.html
Pass H12-831_V1.0-ENU Review Guide, Reliable H12-831_V1.0-ENU Test Engine: https://drive.google.com/open?id=1agfCJh1enNHH3R1d_w6latdyoTjRxVl7