[Mar-2023] Download Real Fortinet NSE4_FGT-7.0 Exam Dumps Test Engine Exam Questions
New NSE4_FGT-7.0 exam dumps Use Updated Fortinet Exam
Introduction to the Fortinet NSE4_FGT-7.0 Certification Exam
NSE4_FGT-7.0 is also known as NSE 4 Network Security Professional. This certification exam is authorized by the National Security Agency (NSA) and is approved by Fortinet. The NSE4_FGT-7.0 certification exam is designed to test the knowledge of network security professionals who want to show their skills and knowledge in Fortinet NSE 4 Network Security products and solutions. CSF setting the server is a requirement for the exam. NSE4_FGT-7.0 Dumps is designed to help the candidates to get ready for the Fortinet NSE4_FGT-7.0 certification exam.
The NSE4_FGT-7.0 certification exam is designed for network security professionals with intermediate knowledge and skills necessary to manage the day-to-day operation of FortiGate appliances, as well as configuration and monitoring of the full range of Fortinet security and networking capabilities. Virtual wire-frames and sample questions are available for the exam. This exam covers the basic understanding of security threats and how to use Fortinet products to detect and mitigate those threats, manage configuration, administer policies, generate reports, monitor network activities, troubleshoot common problems, and more. Policy traffic direction and traffic flow are tested in this exam.
How to pass Fortinet NSE4_FGT-7.0 Certification Exam in the first attempt
Tips to get your NSE4_FGT-7.0 certification
Here is the way to get success in the Fortinet NSE4_FGT-7.0 Certification Exam
The NSE4_FGT-7.0 certification is an industry recognition that is earned by network professionals who want to show their skills and knowledge in Fortinet NSE 4 Network Security products and solutions. The NSE4_FGT-7.0 certification exam is designed for network security professionals with intermediate knowledge and skills necessary to manage the day-to-day operation of FortiGate appliances, as well as configuration and monitoring of the full range of Fortinet security and networking capabilities. This exam covers the basic understanding of security threats and how to use Fortinet products to detect and mitigate those threats, manage configuration, administer policies, generate reports, monitor network activities, troubleshoot common problems, and more. Disableset webfilter, Outgoing interface, and web application firewall can be configured with FortiGate Security appliances.
Here we are going to discuss the resources including NSE4_FGT-7.0 Dumps that we can use to get ready for the NSE4_FGT-7.0 certification Exam. Earning the NSE4_FGT-7.0 certification will set individuals apart from their competition, thereby enticing employers to hire them based on the extra knowledge they have proven they hold. Local quick mode selector of the exam is available for those who are short on time. In this guide, we are going to explain the Fortinet NSE4_FGT-7.0 exam, the certification requirements, how to prepare for it, and the steps you can take to get certified. Information like cost, number of questions, topics covered, and exam format will be covered here. So, let us get started!
Which is the targeted audience for the Fortinet NSE4_FGT-7.0 Certification Exam?
The targeted audience for the Fortinet NSE4_FGT-7.0 Certification Exam is network security professionals. It includes network security experts and consultants. According to the NSE4_FGT-7.0 Dumps, it includes the people who work in network security-related companies. They include both, technical and non-technical people. Collector agent is also used by many companies. Bigger companies also hire people who have certified the Fortinet NSE4_FGT-7.0 Certification Exam.
NEW QUESTION 42
What is the effect of enabling auto-negotiate on the phase 2 configuration of an IPsec tunnel?
- A. FortiGate automatically negotiates different local and remote addresses with the remote peer.
- B. FortiGate automatically negotiates different encryption and authentication algorithms with the remote peer.
- C. FortiGate automatically negotiates a new security association after the existing security association expires.
- D. FortiGate automatically brings up the IPsec tunnel and keeps it up, regardless of activity on the IPsec tunnel.
Answer: D
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=12069
NEW QUESTION 43
Refer to the exhibit showing a debug flow output.
Which two statements about the debug flow output are correct? (Choose two.)
- A. The default route is required to receive a reply.
- B. The debug flow is of ICMP traffic.
- C. A new traffic session is created.
- D. A firewall policy allowed the connection.
Answer: B,C
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.2.3/cookbook/54688/debugging-the-packet-flow
NEW QUESTION 44
Refer to the exhibit.
According to the certificate values shown in the exhibit, which type of entity was the certificate issued to?
- A. A root CA
- B. A bridge CA
- C. A subordinate
- D. A user
Answer: D
NEW QUESTION 45
Examine the IPS sensor and DoS policy configuration shown in the exhibit, then answer the question below.
When detecting attacks, which anomaly, signature, or filter will FortiGate evaluate first?
- A. SMTP.Login.Brute.Force
- B. ip_src_session
- C. IMAP.Login.brute.Force
- D. Location: server Protocol: SMTP
Answer: C
NEW QUESTION 46
An administrator has configured two-factor authentication to strengthen SSL VPN access. Which additional best practice can an administrator implement?
- A. Configure different SSL VPN realms.
- B. Configure Source IP Pools.
- C. Configure host check.
- D. Configure split tunneling in tunnel mode.
Answer: C
NEW QUESTION 47
Examine the exhibit, which contains a virtual IP and firewall policy configuration.


The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port2) interface has the IP address
10.0.1.254/24.
The first firewall policy has NAT enabled on the outgoing interface address. The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT the Internet traffic coming from a workstation with the IP address 10.0.1.10/24?
- A. 10.200.1.1
- B. 10.0.1.254
- C. Any available IP address in the WAN (port1) subnet 10.200.1.0/24
- D. 10.200.1.10
Answer: D
Explanation:
Explanation
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-firewall-52/Firewall%20Objects/Virtual%20IPs.
NEW QUESTION 48
Which two statements about antivirus scanning mode are true? (Choose two.)
- A. In proxy-based inspection mode, antivirus scanning buffers the whole file for scanning, before sending it to the client.
- B. In flow-based inspection mode, FortiGate buffers the file, but also simultaneously transmits it to the client.
- C. In flow-based inspection mode, files bigger than the buffer size are scanned.
- D. In proxy-based inspection mode, files bigger than the buffer size are scanned.
Answer: A,B
Explanation:
An antivirus profile in full scan mode buffers up to your specified file size limit. The default is 10 MB. That is large enough for most files, except video files. If your FortiGate model has more RAM, you may be able to increase this threshold. Without a limit, very large files could exhaust the scan memory. So, this threshold balances risk and performance. Is this tradeoff unique to FortiGate, or to a specific model? No. Regardless of vendor or model, you must make a choice. This is because of the difference between scans in theory, that have no limits, and scans on real-world devices, that have finite RAM. In order to detect 100% of malware regardless of file size, a firewall would need infinitely large RAM-something that no device has in the real world. Most viruses are very small. This table shows a typical tradeoff. You can see that with the default 10 MB threshold, only 0.01% of viruses pass through.
NEW QUESTION 49
Refer to the exhibits to view the firewall policy (Exhibit A) and the antivirus profile (Exhibit B).

Which statement is correct if a user is unable to receive a block replacement message when downloading an infected file for the first time?
- A. The volume of traffic being inspected is too high for this model of FortiGate.
- B. The intrusion prevention security profile needs to be enabled when using flow-based inspection mode.
- C. The firewall policy performs the full content inspection on the file.
- D. The flow-based inspection is used, which resets the last packet to the user.
Answer: D
Explanation:
* "ONLY" If the virus is detected at the "START" of the connection, the IPS engine sends the block replacement message immediately
* When a virus is detected on a TCP session (FIRST TIME), but where "SOME PACKETS" have been already forwarded to the receiver, FortiGate "resets the connection" and does not send the last piece of the file. Although the receiver got most of the file content, the file has been truncated and therefore, can't be opened. The IPS engine also caches the URL of the infected file, so that if a "SECOND ATTEMPT" to transmit the file is made, the IPS engine will then send a block replacement message to the client instead of scanning the file again.
In flow mode, the FortiGate drops the last packet killing the file. But because of that the block replacement message cannot be displayed. If the file is attempted to download again the block message will be shown.
NEW QUESTION 50
Refer to the exhibit, which contains a radius server configuration.
An administrator added a configuration for a new RADIUS server. While configuring, the administrator selected the Include in every user group option.
What will be the impact of using Include in every user group option in a RADIUS configuration?
- A. This option places the RADIUS server, and all users who can authenticate against that server, into every RADIUS group.
- B. This option places all users into every RADIUS user group, including groups that are used for the LDAP server on FortiGate.
- C. This option places the RADIUS server, and all users who can authenticate against that server, into every FortiGate user group.
- D. This option places all FortiGate users and groups required to authenticate into the RADIUS server, which, in this case, is FortiAuthenticator.
Answer: C
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/634373/authentication-servers
NEW QUESTION 51
Which of the following are purposes of NAT traversal in IPsec? (Choose two.)
- A. To force a new DH exchange with each phase 2 rekey.
- B. To encapsulation ESP packets in UDP packets using port 4500.
- C. To dynamically change phase 1 negotiation mode aggressive mode.
- D. To detect intermediary NAT devices in the tunnel path.
Answer: B,D
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD48755
NEW QUESTION 52
Refer to the exhibit.
Examine the intrusion prevention system (IPS) diagnostic command.
Which statement is correct If option 5 was used with the IPS diagnostic command and the outcome was a decrease in the CPU usage?
- A. The IPS engine was unable to prevent an intrusion attack.
- B. The IPS engine will continue to run in a normal state.
- C. The IPS engine was inspecting high volume of traffic.
- D. The IPS engine was blocking all traffic.
Answer: C
NEW QUESTION 53
Which of statement is true about SSL VPN web mode?
- A. The external network application sends data through the VPN.
- B. It supports a limited number of protocols.
- C. It assigns a virtual IP address to the client.
- D. The tunnel is up while the client is connected.
Answer: B
Explanation:
Explanation
FortiGate_Security_6.4 page 575 - Web mode requires only a web browser, but supports a limited number of protocols.
NEW QUESTION 54
What types of traffic and attacks can be blocked by a web application firewall (WAF) profile? (Choose three.)
- A. Traffic to botnetservers
- B. SQL injection attacks
- C. Credit card data leaks
- D. Server information disclosure attacks
- E. Traffic to inappropriate web sites
Answer: B,C,D
NEW QUESTION 55
Which statement is correct regarding the inspection of some of the services available by web applications embedded in third-party websites?
- A. FortiGate can inspect sub-application traffic regardless where it was originated.
- B. The application signature database inspects traffic only from the original web application server.
- C. The security actions applied on the web applications will also be explicitly applied on the third-party websites.
- D. FortiGuard maintains only one signature of each web application that is unique.
Answer: A
NEW QUESTION 56
Which two statements are correct about SLA targets? (Choose two.)
- A. SLA targets are optional.
- B. You can configure only two SLA targets per one Performance SLA.
- C. SLA targets are used only when referenced by an SD-WAN rule.
- D. SLA targets are required for SD-WAN rules with a Best Quality strategy.
Answer: A,C
NEW QUESTION 57
An administrator must disable RPF check to investigate an issue.
Which method is best suited to disable RPF without affecting features like antivirus and intrusion prevention system?
- A. Disable the RPF check at the FortiGate interface level for the source check.
- B. Enable asymmetric routing at the interface level.
- C. Disable the RPF check at the FortiGate interface level for the reply check.
- D. Enable asymmetric routing, so the RPF check will be bypassed.
Answer: A
NEW QUESTION 58
When a firewall policy is created, which attribute is added to the policy to support recording logs to a FortiAnalyzer or a FortiManager and improves functionality when a FortiGate is integrated with these devices?
- A. Universally Unique Identifier
- B. Sequence ID
- C. Log ID
- D. Policy ID
Answer: A
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/554066/firewall-policies
"Universally Unique Identifier (UUID) attributes have been added to policies to improve functionality when working with FortiManager or FortiAnalyzer units"
NEW QUESTION 59
Refer to the exhibit.
An administrator is running a sniffer command as shown in the exhibit.
Which three pieces of information are included in the sniffer output? (Choose three.)
- A. Packet payload
- B. Ethernet header
- C. Application header
- D. Interface name
- E. IP header
Answer: A,D,E
NEW QUESTION 60
Refer to the exhibit, which contains a static route configuration.
An administrator created a static route for Amazon Web Services.
What CLI command must the administrator use to view the route?
- A. get router info routing-table database
- B. get router info routing-table all
- C. diagnose firewall proute list
- D. get internet service route list
Answer: C
NEW QUESTION 61
......
Pass Your NSE4_FGT-7.0 Dumps as PDF Updated on 2023 With 174 Questions: https://www.examprepaway.com/Fortinet/braindumps.NSE4_FGT-7.0.ete.file.html
Verified NSE4_FGT-7.0 Dumps Q&As - NSE4_FGT-7.0 Test Engine with Correct Answers: https://drive.google.com/open?id=1PufoJAiSlKw6D99CALcoyU3Fb991NSk4