[Nov-2021] Feel VMware 5V0-41.20 Dumps PDF Will likely be The best Option
5V0-41.20 exam torrent VMware study guide
NEW QUESTION 14
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements.
What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)
- A. Under Monitor, check Routing tab.
- B. Check underlay network (bandwidth, latency, jitter, packet loss).
- C. Review Business Policies configuration and match them against the business requirements.
- D. Change the bandwidth measurement under WAN Overlay Advanced Settings.
Answer: A,B
NEW QUESTION 15
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot gel to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A business policy is created and saved.
How can the network administrator verify the business policy is working?
- A. Select a VCE > Test & Troubleshoot > Remote diagnostics and select List Active flows and check the flows to see what Business policy is applied under the Business policy column.
- B. Executing Route table dump under VCE > Test St Troubleshoot > Remote Diagnostics and select Route Table dump and look for business policy applied in the Route table Dump stats.
- C. Check under Monitor > Applications tab and check the listing of applications at the bottom of the screen and the category of the type of traffic there.
- D. Check under the Monitor > Business Priority tab for Business policy statistics.
Answer: B
NEW QUESTION 16
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.
The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.
Where are two places the administrator must check? (Choose two.)
- A. Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.
- B. Determine if the NVS has been enabled and assigned to a profile.
- C. Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.
- D. Determine if the DH parameter on the Edge has been configured.
Answer: A,C
NEW QUESTION 17
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
The SD-WAN Edge at this location has been activated. It is incapable of establishing any overlay tunnels. Due to this being an internet only branch, no underlay connectivity is present to the hubs. The SD-WAN Edge is connected behind a firewall and the security team states that all necessary ports are open.
How can this issue be resolved?
- A. The security team needs to open TCP port 22 instead of TCP port 2426.
- B. The security team need to open TCP port 2426 outbound but not inbound.
- C. The security team needs to open UDP port 2426 outbound and inbound.
- D. The security team needs to open TCP port 4500 instead of TCP port 2426.
Answer: D
NEW QUESTION 18
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.
What should the administrator check next?
- A. Verify the Business Policy flows are matching.
- B. Verify if Path-MTU Discovery is disabled.
- C. Verify if routes to Gateways are present in the Overlay Flow Control (OFC).
- D. Verify if there is latency, loss, or jitter on the underlay.
Answer: B
NEW QUESTION 19
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present- The network administrator is informed (hat during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Which metrics can a network administrator verify in the QoE screen to determine the overall health of Underlay and Overlay?
- A. Packet Loss, Latency, Speed.
- B. Jitter, Speed, Latency.
- C. Jitter Packet Loss, Speed.
- D. Jitter, Packet Loss, Latency.
Answer: B
NEW QUESTION 20
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.
A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)
- A. Modify the AS Path in New York to be longer for 10.20.11.0/24.
- B. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
- C. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
- D. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.
Answer: B,D
NEW QUESTION 21
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator wants to achieve better high-availability and network reconvergence between LAN-side BGP Networks and the hub Edges in New York.
What must the administrator do?
- A. Modify the Connect and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Connect timer.
- B. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Keep Alive timer.
- C. Nothing, the system will auto-rebalance connections and will provide sub-second convergence.
- D. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Keep Alive timer is 3 times more than the Hold timer.
Answer: C
NEW QUESTION 22
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of lime. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
When attempting to activate an Edge, after clicking on the "activation link" in the email that was sent to the network administrator, the Edge's local UI shows as "Internet down". This is preventing the Edge from coming online and being activated. When referring to the output, the network administrator notices that the Edge has received DHCP addressing.
What could be preventing the Edge from coming online?
- A. Cloud VPN is not enabled in the AMER Branch profile.
- B. The next hop does not respond to ICMP pings.
- C. The Edge's profile does not specify the correct Edge Model.
- D. The subnet mask assigned to the Edge is incorrect.
Answer: C
NEW QUESTION 23
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.
What should the network administrator look for next to determine what the issue might be?
- A. Check Test & Troubleshoot and review a route table dump of the NY hub site.
- B. Determine if OSPF has been configured on the MPLS Routers at the hub.
- C. Check the Global Segment Configuration to see if it has the Routing Flag enabled.
- D. Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose's branch router.
Answer: C
NEW QUESTION 24
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
The network administrator determines the issue preventing the Dallas Branch from coming online.
Refer to the Exhibit(s).
What must the administrator do for the Edge to communicate with the Orchestrator and other branches?
- A. Update the Orchestrator to the latest version as it enables "Auto WAN Swapping"
- B. Reverse the WAN Overlay configurations
- C. Create a User-defined WAN Overlay to bond both interfaces
- D. Delete the User Defined WAN Overlays as the Orchestrator will discover these automatically on MPLS and Internet
Answer: D
NEW QUESTION 25
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago's interfaces. The network administrator's VMware SE has mentioned using the uplink feature to help resolve this.
What are two ways the uplink feature should be used in this scenario? (Choose two.)
- A. Prevent the site in question from becoming a transit site.
- B. Direct all traffic to that neighbor designated as an uplink,
- C. Set the uplink community to forward traffic to a group of neighbors.
- D. Stop mutual redistribution of routes from underlay and overlay.
Answer: A,B
NEW QUESTION 26
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.
What is a possible reason for this?
- A. The routing table on the Edges has not been initialized.
- B. There is an invalid MTU configuration at Chicago.
- C. Cloud VPN for the Edges / Profiles is not enabled.
- D. OSPF or BGP is not enabled.
Answer: C
NEW QUESTION 27
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certconfigurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure thatall sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.
What caused this behavior?
- A. The device is faulty and will need a replacement.
- B. The administrator failed to specify the Edge Type as a VeloCloud Cluster.
- C. The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.
- D. This is an expected behavior.
Answer: D
NEW QUESTION 28
......
VMware 5V0-41.20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
How to Prepare For VMware 5V0-41.20: VMware SD-WAN Troubleshoot Exam
Preparation Guide for VMware 5V0-41.20: VMware SD-WAN Troubleshoot Exam
Introduction
The VMware vSAN 6.7 Specialist exam is for professionals with 6-12 months of hands-on experience configuring, handling, and developing vSphere and vSAN. There are no clear prerequisites for the VMware 5V0-41.20 Course, although you should be acquainted with the principles and technology relevant to virtual machine implementation and administration. You are in control of critical Application developments that cover various platforms and ecosystems as an HTML5 VMware 5V0-41.20 administrator. You work together as a team and excel in a fast-paced world. You manage the application life cycle, build the user interface with HTML5, format it with CSS, and code it with JavaScript.
This exam assesses the knowledge of Core Application Development Concepts, Creating Application Development Objects, and Managing an Application Development Environment. Certification verifies your abilities and experience in the fields in which you prefer to serve. These certifications are available from a variety of suppliers on the market. If an applicant wishes to operate on 5V0-41.20: VMware vSAN 6.7 Specialist and demonstrate his skills, VmWare offers a certification. This VMware vSAN 6.7 Specialist Individuals Qualification 5V0-41.20 A candidate’s skills in 5V0-41.20 exam test Technology can be validated by certification.
In this guide, we will cover the 5V0-41.20 dumps, and all aspects of the 5V0-41.20 practice exams.
Use Valid New 5V0-41.20 Test Notes & 5V0-41.20 Valid Exam Guide: https://www.examprepaway.com/VMware/braindumps.5V0-41.20.ete.file.html
5V0-41.20 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://drive.google.com/open?id=1IJyGUOuZKFL2F9NAMa3jAEobjkbLqrmI