Online Questions - Valid Practice HPE0-J68 Exam Dumps Test Questions
100% Real HPE0-J68 dumps - Brilliant HPE0-J68 Exam Questions PDF
HP HPE0-J68 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
Learn about the logic behind the test
HPE HPE0-J68 Exam is the intermediate level exam from HP Certification III. This certification is highly important as it will help you to get knowledge about different types of products that are available in the market for IT professionals. If you are looking for a good job then these certifications will surely prove to be beneficial for you as employers like to see the HPE0-J68 Exam on your resume. This certification will also help you in getting various job opportunities within days after completing the course. HP HPE0-J68 Exam is a bit tougher one than the previous levels because it requires more understanding and practice but if you can understand all its concepts, there is nothing to worry about. Initially, the capacity of the simulator for the controller of snapshots. You can easily pass your certification by preparing with the help of updated HPE0-J68 exam dumps which contain all the required information that is needed to prepare for this certification test. These updated HPE0-J68 Exam exam dumps will also make you familiar with the actual exam scenario so that you can give your best during your exam. So, choose the HPE0-J68 practice test latest lab simulations and pass your test with flying colors.
NEW QUESTION 103
Which feature allows HPE Primera, HPE Nimble, and HPE XP arrays to work with third-party management tools?
- A. REST API
- B. StoreServe Management Console (SSMC)
- C. Service Processor
- D. Data Protection Manager (DPM)
Answer: A
NEW QUESTION 104
A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD's configured with RAID5 7+1. They plan to add four more 3.84 TB SSD's.
What needs to be changed on the configuration once the new SSD's are installed?
- A. Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.
- B. Change the cpg setsize to RAID5 5+1 and run tunesys.
- C. Change the availability level from cage to magazine.
- D. Adjust the cpg growth value to match amount of SSD's.
Answer: B
NEW QUESTION 105
What is the benefit of HPE Synergy? (Choose two.)
- A. It can prevent block storage services from HPE 3PAR as part of the resource pool.
- B. It can compose and reclaim DAS storage.
- C. It supports up to three HPE StoreVirtual VSA nodes for storage RAID.
- D. It supports HPE BladeSystem c-class FlexFabric interconnect modules.
- E. It can use HPE 3PAR File Persona for object storage.
Answer: A,B
NEW QUESTION 106
What can move data directly from a snapshot to backup storage independent of backup server software?
- A. Express Protect
- B. Virtual Lock
- C. SSMC
- D. CLI
Answer: A
Explanation:
The Express Protect feature offers data protection by facilitating Express Protect of snapshots from HPE 3PAR StoreServ to HPE StoreOnce.
NEW QUESTION 107
A customer run several HPE 3PAR storeserv system in their environment using data rest encryption .The customer needs to add an HPE 3PAR Storeserv 8000system to the storage pool and an external key manager for all systems.. What is the requirement for this solution?
- A. Data on the existing HPE 3PAR storeserv array must be decrypted and re-encrypted with new keys
- B. HPE ESKM FIPS mode must be disabled by the administrator
- C. All drives of the new HPE 3PAR storeserv array must be self-encrypting
- D. Boot server for the existing 3PAR storeserv array must be replaced with self-encrypting drive
Answer: C
NEW QUESTION 108
You are planning an upgrade to a customer's existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade.
Which statement is correct about performing this upgrade?
- A. As long as MEM driver is installed on VMware vSphere, no path failures are seen.
- B. The MPIO service will do a failover, and the servers will continue to have access via two paths.
- C. Windows servers require host explorer is installed to ensure MPIO is unaffected.
- D. When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers.
Answer: D
NEW QUESTION 109
A customer need a new storage system for visual desktop infrastructure environment to reduce the time required to provision new desktop. Which HPE solution should you recommended to fulfill this customers requirements?
- A. SmartClone on HPE store virtual VSA(54)
- B. Virtual Copy on HPE 3Par storeServ
- C. Snapclones on HPE MSA 2040
- D. Storage pool on HPE store Easy
Answer: A
NEW QUESTION 110
A customer needs to expand an HPE StoreVirtual VSA based cluster with two additional VSA instances.
What do you need to consider when designing the new VSA instances?
- A. They will require downtime to re-balance the resources within the cluster.
- B. They must be configured into a new management group.
- C. They can only have equal to or smaller capacity compared to the existing instances.
- D. They must be of equal or greater capacity than the existing instances in a cluster.
Answer: D
NEW QUESTION 111
Match the type of storage found in today's market to the HPE storage solution optimized for that capacity?
- A. Nimble - Block
- B. StoreVirtual - Block
- C. HPE 3PAR StoreServ - Block
- D. Scalability - Object
- E. MSA - Block
- F. StoreEasy - File
Answer: C
NEW QUESTION 112
You need to deploy a Recovery Manager Central appliance and integrate it with a customer's 3PAR system.
Which information must be collected from the customer in order to proceed with the installer? (Choose two.)
- A. NFS path
- B. vCenter IP address or hostname
- C. IP address of the RMC
- D. StoreOnce store name
- E. HPE 3PAR used capacity
Answer: C,E
NEW QUESTION 113
Exhibit:
The customer has upgraded the first of their two HPE StoreServ 8200to the latest inform OS storage configuration to support oracle database volume to utilize HPE 3PAR compression .
Based on the analysis of the array .what would be your suggestion to implement the requested change?
- A. Install the catalyst agent on the oracle server to enable inline compression on the selected VV
- B. Balance the workloads between the arrays to have enough headroom for compression
- C. Consider adding another node pair for compression to work efficiently
- D. Configure the source-side the compression to offload compression to the Host
Answer: A
NEW QUESTION 114
Which tool is used to provide centralized management of 3PAR and Primera arrays?
- A. WebUI
- B. Primera UI
- C. SMU
- D. SSMC
Answer: D
NEW QUESTION 115
Refer to the exhibit.
A customer purchased a Primera C6S0 array to replace several older 3PAR arrays. They plan to upgrade the system as each 3PAP reaches the end of its lease. The initial sizing included 100TB effective capacity for an Oracle database environment.
The first 3PAR to come off lease has 100TB of VDI boot images that support thousands of users.
Which addition to the Primera should you recommend?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: B
NEW QUESTION 116
A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB ERP database. What would be a design approach to solve this issue ?
- A. Add additional SSd drives as cache to the system and PIN the volume
- B. Change RAID of the drives to RAID -1and setup quality of services for the volume
- C. Enable storage tiering on the system and map the volume to the new tier
- D. Perform controller upgrade to a Nimbel CS3000 storage systems
Answer: A
NEW QUESTION 117
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. FL_PORT (WRONG)
- B. E_PORT (Correct)
- C. N_PORT
- D. F_PORT
Answer: B
NEW QUESTION 118
You have just completed a performance analysis of an HPE 3PAR StoreServ 8400 disk array with different tiers at a customer's site. After reviewing the performance metrics, you determine that they should install a new tier of SSD drives.
Which actions should you recommend they take to fully optimize the array? (Choose two.)
- A. Configure Adaptive Flash Cache.
- B. Rebalance all flash drives between nodes 0 and 2.
- C. Configure scheduled tunesys tasks.
- D. Configure dedicated drives to enable Adaptive Flash Cache.
- E. Configure Adaptive Optimization.
Answer: C,E
NEW QUESTION 119
Exhibit:
Which fabric design is shown?
- A. cascaded
- B. single fabric
- C. core-edge
- D. meshed
Answer: D
NEW QUESTION 120
What is the benefits of HPE synergy(Select 2)
- A. It can present block storage services from HPE 3par as part of the resource pool
- B. It can compose and reclaim DAS storage
- C. It support HPE blade system C-Class Flex Fabrics Interconnect module (need to check)
- D. It support up to 3 HPE store Virtual VSA nodes for storage RAID
- E. It can use HPE 3PAR file persona for objet storage
Answer: A,B
NEW QUESTION 121
Match each HPE storage solution to its use case.
Answer:
Explanation:
NEW QUESTION 122
Which storage principle would benefits of customer who has several departments in their organization with different storage needs?
- A. Scale out storage
- B. Federated storage
- C. Autonomic Management
- D. Multi-tenancy
Answer: D
NEW QUESTION 123
You are adding a new host for an HPE 3PAR StoreServ proof-of-concept .In addition to the host name ,What is the minimum information that is required to create a host profile?
- A. Host Persona
- B. Host MAC
- C. Host WWN
- D. Host set
Answer: C
NEW QUESTION 124
Which type of networking switch handles both Ethernet and fibre channel traffic?
- A. Virtual
- B. Director
- C. Converged
- D. Edge
Answer: C
NEW QUESTION 125
You have proposed a Primera array to a customer for primary storage. The customer currently has an older HPE 3PAR array and will continue to use it moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
- A. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
- B. RMC 6.2
- C. Target drive type must match source drive type
- D. 2-port 10 Gb Ethernet Adapter (NIC) is required in each array
- E. Required license must be provided
- F. Check that the 3PAR OS version is supported
Answer: A,E
NEW QUESTION 126
Match the HPE converged Strategy principle with its function
- A. Storage virtualization:- Deliver simplified management ,higher utilization ,efficient, and agility by separating the logical and physical resource.
- B. Deduplication:-Reduce allocated capacity by eliminating data redundancy
- C. Storage tiering:-Use combination of I/O accelerator to place data to meet price, performance, and latency requirements .
- D. Thin provisioning:-Reduce TCO ,Opex and CPEx by using virtualization technology to make storage resources more efficient.
- E. Federated Storage:- Move data between storage systems in peer-to-peer relationship simply, dynamically and nondestructively
Answer: A
NEW QUESTION 127
......
Discuss how it works for career advancement
How does the HPE0-J68 exam work in your professional career? The HP HPE0-J68 exam is a more advanced level of expertise than the HPE0-J67 exam. Those who have earned their certification can take on more challenging tasks than they would be able to without passing the exam. The HPE0-J68 advanced level is not required, but it can lead to higher pay and better positions within an organization. HPE0-J68 allows a person to work with and support data center servers and storage systems. The certification also allows for a deep understanding of configuration and management, allowing for storage systems repair or initiating when necessary. The advanced level also allows for troubleshooting and deployment, and it is also useful if one wishes to pursue a higher-level certification. HPE0-J67 is aimed at IT professionals who are entering their initial job after earning their first IT certification or those who have completed their education programs such as college, university, or technical school. It is also aimed at those who are looking for new job opportunities within an existing company. These professionals may be IT generalists, who provide basic IT support for all kinds of devices.
HPE0-J68 Exam PDF [2022] Tests Free Updated Today with Correct 178 Questions: https://www.examprepaway.com/HP/braindumps.HPE0-J68.ete.file.html
HP HPE0-J68 Exam Preparation Guide and PDF Download: https://drive.google.com/open?id=1xRKbF_yTBPVpNIodyvW9G8coJCaTaQfH