Prepare Top Versa Networks VNX100 Exam Study Guide Practice Questions Edition
Go to VNX100 Questions - Try VNX100 dumps pdf
NEW QUESTION # 15
Review the exhibit.
Your manager asks you to explain what the DIA option does when configuring split tunnels as shown in the exhibit.
In this scenario, which statement is true?
- A. It implements a BGP default route advertisement into the underlay transport of the tenant.
- B. It implements a BGP default route advertisement into the local LAN VRF of the tenant.
- C. It implements a BGP default route advertisement into the control network of the tenant.
- D. It implements a BGP default route advertisement into the overlay network of remote tenants.
Answer: B
NEW QUESTION # 16
Which statement about site discovery in a Versa Secure SD-WAN solution is true?
- A. When a new site is provisioned, existing sites auto-discover the new site using MP-BGP.
- B. When a new site is provisioned, Versa Controller reconfigures existing sites with the new site details.
- C. When a new site is provisioned, Versa Director notifies existing sites of the newly added site.
- D. When a new site is provisioned, the administrator must add the new site information to existing site configurations.
Answer: A
NEW QUESTION # 17
Your organization requires any new CPE deployment to have Versa Operating System version 20.2.2.
In this scenario, how would you accomplish this task?
- A. Select preferred software version to 20.2.2 in the Template Workflow.
- B. Select preferred software version to 20.2.2 in the Device Group.
- C. Select preferred software version to 20.2.2 in the Common Template.
- D. Select preferred software version to 20.2.2 in the Device Bind Data.
Answer: A
NEW QUESTION # 18
In a Post-staging Template, device-specific information such as WAN IP addresses, LAN subnets, and route ID are referred to as what?
- A. Device Group
- B. Data Store
- C. Staging Template
- D. Bind Data
Answer: D
NEW QUESTION # 19
You are an administrator of a Versa Secure SD-WAN network. Due to a recent security event, you need to apply a new URL filtering profile on all of the SD-WAN CPEs.
In this scenario, which template would you use to configure URL filtering?
- A. Stateful Firewall Template
- B. Common Template
- C. NexGen Firewall Template
- D. QoS Template
Answer: C
NEW QUESTION # 20
Your Versa CPE security policy rule is configured to generate and send logging information on policy hits using Default Logging Profile.
In this scenario, which Versa component would allow you to view the logs?
- A. Versa Analytics
- B. Versa Director
- C. Versa Secure Access Gateway
- D. Versa Controller
Answer: A
NEW QUESTION # 21
Which two statements about a Versa Secure SD-WAN deployment are true? (Choose two.)
- A. By default, all data traffic is forwarded on unencrypted tunnels.
- B. By default, all control traffic is forwarded on IPSec tunnels.
- C. By default, all control traffic is forwarded on unencrypted tunnels.
- D. By default, all data traffic is forwarded on IPSec tunnels.
Answer: A,B
NEW QUESTION # 22
In a Versa Secure SD-WAN solution, what are three functions of a hub controller? (Choose three.)
- A. It can be a staging server.
- B. It does CPE lifecycle management.
- C. It is a control plane node.
- D. It is a data plane node.
- E. It provides visibility and control.
Answer: A,C,E
NEW QUESTION # 23
Which two statements about the Versa Secure SD-WAN head-end deployment are true? (Choose two.)
- A. Versa Controller can be installed as a virtual machine.
- B. Versa Analytics can be installed on-premises.
- C. Versa Analytics only supports a cloud-based installation.
- D. Versa Controller only supports a cloud-based installation.
Answer: A,B
NEW QUESTION # 24
Which two statements about the Versa Secure SD-WAN solution are true? (Choose two.)
- A. Versa Director is used for end-user data traffic transport.
- B. All components support high availability.
- C. Versa CPEs are activated using Zero Touch Provisioning.
- D. Versa Controller provides historical usage reports.
Answer: B,C
NEW QUESTION # 25
Review the exhibit.
Which hub topology is shown in the exhibit?
- A. spoke-to-spoke direct
- B. spoke-to-spoke via hub
- C. spoke-hub-hub-spoke
- D. spoke-to-spoke only
Answer: B
NEW QUESTION # 26
You are asked to implement a third-party application server as a virtual machine on Versa CPE.
In this scenario, which template would you use to accomplish this task?
- A. Service Chain Tempplate
- B. Stateful Firewall Template
- C. Common Template
- D. Application Steering Template
Answer: D
NEW QUESTION # 27
A customer has a site activation planned using script-based provisioning; however, while unboxing the SD-WAN CPE, the engineer notices that the console cable is missing.
In this scenario, what would an engineer do to initiate the script-based provisioning?
- A. Connect a laptop to the auxiliary port on the device.
- B. Connect a laptop to any WAN port on the device.
- C. Connect a laptop to any LAN port on the device.
- D. Connect a laptop to the management port on the device.
Answer: D
NEW QUESTION # 28
Which statement about Versa Director is true?
- A. It works as a VPN concentrator.
- B. It works as a BGP route reflector.
- C. It works as an orchestrator.
- D. It works as a log forwarder.
Answer: C
NEW QUESTION # 29
Which two statements about the Versa SD-WAN control plane are true? (Choose two.)
- A. Versa Private Address Family is used to advertise topology information.
- B. NETCONF advertises topology changes.
- C. SD-WAN topology is discovered using MP-iBGP.
- D. SD-WAN topology is discovered using eBGP.
Answer: B,C
NEW QUESTION # 30
The administrator has to change the IP address of the Internet WAN link from DHCP to Static. The device template under Workflows has been updated with this change, but the change is not reflected in the branch device configuration.
In this scenario, which two steps should you take to solve this problem? (Choose two.)
- A. Update the Device Bind Data in Workflows with the IP address and gateway of the Internet WAN link.
- B. Commit the Device Template configuration to the appliance.
- C. Update the controller's configuration with the static IP address of the branch's Internet WAN link.
- D. Commit the appliance configuration to the Device Template.
Answer: B,C
NEW QUESTION # 31
Which two statements about Versa SD-WAN live monitoring of Versa CPEs are true? (Choose two.)
- A. Versa Analytics provide real-time monitoring capabilities for all services running in Versa CPE.
- B. Versa Director has built-in ping, traceroute, tcpdump, and speed test tools.
- C. Versa Director provides real-time monitoring capabilities for all services running in Versa CPE.
- D. Versa Analytics has built-in ping, traceroute, tcpdump, and speed test tools.
Answer: B,C
NEW QUESTION # 32
Which three protocols are able to be configured using Versa Workflows? (Choose three.)
- A. IS-IS
- B. OSPF
- C. Static
- D. BGP
- E. EIGRP
Answer: B,C,D
NEW QUESTION # 33
Review the exhibit.
Referring to the gear icon shown in the exhibit, when would you select the gear icon for a VLAN in a template workflow?
- A. when all the devices sharing this workflow template have more than one VLAN on the vni-0/1 interface
- B. when all the devices sharing this workflow template have the same VLAN on the vni-0/1 interface
- C. when all the devices sharing this workflow template have different VLANs on the vni-0/1 interface
- D. when all the devices sharing this workflow template have the default VLAN on the vni-0/1 interface
Answer: C
NEW QUESTION # 34
Which statement describes a Versa Workflow?
- A. A Versa Workflow is another name for a template in Versa Director.
- B. A Versa Workflow is the process used to order services from Versa Networks.
- C. A Versa Workflow is a process that creates or modifies an object in Versa Director.
- D. A Versa Workflow can be used to configure routing policies on third-party devices.
Answer: B
NEW QUESTION # 35
Which two statements about security zones in a Versa Secure SD-WAN solution are true? (Choose two.)
- A. Security zones provide segmentation of traffic.
- B. Security zones hide interfaces from tenants in a multitenant environment.
- C. Security zones separate routing information into separate routing tables.
- D. Security zones group interfaces into security domains.
Answer: A,B
NEW QUESTION # 36
......
The VNX100 certification exam covers a range of topics related to SD-WAN, including network design and architecture, traffic steering, security, and troubleshooting. The exam consists of multiple-choice questions and requires a passing score of 70% or higher. Candidates who pass the exam will receive a certificate that validates their knowledge and skills in SD-WAN technologies, and demonstrates their ability to deploy and manage SD-WAN solutions using the Versa Networks platform.
Free Administrator SD-WAN Associate VNX100 Exam Question: https://www.examprepaway.com/Versa-Networks/braindumps.VNX100.ete.file.html
Dumps Practice Exam Questions Study Guide for the VNX100 Exam: https://drive.google.com/open?id=1dcTMesgUff8xIFXVztXkhrIiWpODOWFf