Pass Your JNCIP-SEC JN0-636 Exam Easily with Accurate PDF Questions [Mar 07, 2023]
JN0-636 Certification Exam Dumps Questions in here
Juniper JN0-636 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 32
What are two valid modes for the Juniper ATP Appliance? (Choose two.)
- A. flow collector
- B. event collector
- C. all-in-one
- D. core
Answer: A,C
NEW QUESTION 33
Exhibit
Referring to the exhibit, which three statements are true? (Choose three.)
- A. The packet's destination is to an interface on the SRX Series device.
- B. The packet originated within the Trust zone.
- C. The packet is dropped before making an SSH connection.
- D. The packet is allowed to make an SSH connection.
- E. The packet's destination is to a server in the DMZ zone.
Answer: A,B,C
NEW QUESTION 34
Exhibit
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet is processed in the first path packet flow.
- B. The packet is processed as host inbound traffic.
- C. The packet matches a configured security policy.
- D. The packet matches the default security policy.
Answer: B,D
NEW QUESTION 35
Exhibit
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet is explicitly rejected.
- B. The packet is part of an existing session.
- C. The packet is part of a new session.
- D. The packet is silently discarded.
Answer: A,C
NEW QUESTION 36
You are asked to provide single sign-on (SSO) to Juniper ATP Cloud. Which two steps accomplish this goal?
(Choose two.)
- A. Configure Microsoft Azure as the identity provider (IdP).
- B. Configure Juniper ATP Cloud as the service provider (SP).
- C. Configure Juniper ATP Cloud as the identity provider (IdP).
- D. Configure Microsoft Azure as the service provider (SP).
Answer: A,D
NEW QUESTION 37
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The local gateway address for the IPsec tunnel is 10.20.20.2
- B. NAT is being used to change the source address of outgoing packets
- C. The session information indicates that the IPsec tunnel has not been established
- D. The remote gateway address for the IPsec tunnel is 10.20.20.2
Answer: D
NEW QUESTION 38
Exhibit
Referring to the exhibit, which two statements are true about the CAK status for the CAK named "FFFP"? (Choose two.)
- A. SAK is not generated using this key.
- B. SAK is successfully generated using this key.
- C. CAK is not used for encryption and decryption of the MACsec session.
- D. CAK is used for encryption and decryption of the MACsec session.
Answer: A,D
NEW QUESTION 39
Exhibit
Which statement is true about the output shown in the exhibit?
- A. The SRX Series device is configured to disable IPv6 packet forwarding.
- B. The SRX Series device is configured with default security forwarding options.
- C. The SRX Series device is configured with flow-based IPv6 forwarding options.
- D. The SRX Series device is configured with packet-based IPv6 forwarding options.
Answer: B
NEW QUESTION 40
Exhibit
You configure Source NAT using a pool of addresses that are in the same subnet range as the external ge-0/0/0 interface on your vSRX device. Traffic that is exiting the internal network can reach external destinations, but the return traffic is being dropped by the service provider router.
Referring to the exhibit, what must be enabled on the vSRX device to solve this problem?
- A. Proxy ARP
- B. DNS Doctoring
- C. Persistent NAT
- D. STUN
Answer: B
NEW QUESTION 41
You are asked to download and install the IPS signature database to a device operating in chassis cluster mode. Which statement is correct in this scenario?
- A. You must download and install the IPS signature package on the primary node.
- B. The first time you synchronize the IPS signature package from the primary node to the backup node, the primary node must be rebooted.
- C. The first synchronization of the backup node and the primary node must be performed manually.
- D. The IPS signature package must be downloaded and installed on the primary and backup nodes.
Answer: D
NEW QUESTION 42
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The local gateway address for the IPsec tunnel is 10.20.20.2
- B. NAT is being used to change the source address of outgoing packets
- C. The session information indicates that the IPsec tunnel has not been established
- D. The remote gateway address for the IPsec tunnel is 10.20.20.2
Answer: D
NEW QUESTION 43
Exhibit
An administrator wants to configure an SRX Series device to log binary security events for tenant systems.
Referring to the exhibit, which statement would complete the configuration?
- A. Configure the tenant as TSYS1 for the pi security profile.
- B. Configure the tenant as root for the pi security profile.
- C. Configure the tenant as local for the pi security profile
- D. Configure the tenant as master for the pi security profile.
Answer: B
NEW QUESTION 44
Which two log format types are supported by the JATP appliance? (Choose two.)
- A. YAML
- B. XML
- C. YANG
- D. CSV
Answer: B,D
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/jatp/topics/topic-map/jatp-custom-log-ingestion.html
NEW QUESTION 45
Exhibit
Referring to the exhibit, which statement is true?
- A. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
- B. This custom block list feed will be used instead of the Juniper Seclntel block list feed
- C. This custom block list feed will be used before the Juniper Seclntel
- D. This custom block list feed will be used after the Juniper Seclntel block list feed.
Answer: D
NEW QUESTION 46
You want to enroll an SRX Series device with Juniper ATP Appliance. There is a firewall device in the path between the devices. In this scenario, which port should be opened in the firewall device?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 47
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of three interfaces.
- B. The collector must have a minimum of five interfaces.
- C. The collector must have a minimum of two interfaces.
- D. The collector must have a minimum of four interfaces.
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/jatp/topics/task/configuration/jatp-traffic-collectorsetting-ssh-honeypot-detection.html
NEW QUESTION 48
Exhibit
You configure a traceoptions file called radius on your returns the output shown in the exhibit What is the source of the problem?
- A. The RADIUS server IP address is unreachable.
- B. The RADIUS server suffered a hardware failure.
- C. An incorrect password is being used.
- D. The authentication order is misconfigured.
Answer: B
NEW QUESTION 49
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The data that traverses the ge-0/070 interface is secured by a secure association key.
- B. The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.
- C. The data that traverses the ge-070/0 interface can be intercepted and read by anyone.
- D. The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.
Answer: B,C
NEW QUESTION 50
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. You must manually create the suspicious_Endpoint3 feed in the Juniper ATP Cloud interface.
- B. The 3uspiciou3_Endpoint3 feed is usable by any SRX Series device that is a part of the same realm as SRX-1
- C. Juniper ATP Cloud automatically creates the 3uopi'cioua_Endpoints feed after you commit the security policy.
- D. The 3uspicious_Endpoint3 feed is only usable by the SRX-1 device.
Answer: B,D
NEW QUESTION 51
All interfaces involved in transparent mode are configured with which protocol family?
- A. ethernet - switching
- B. inet
- C. bridge
- D. mpls
Answer: D
NEW QUESTION 52
......
Verified JN0-636 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump: https://drive.google.com/open?id=1C8L4MH-uWqLVJoO1zXghFUNp5kJu4Ix2
Updated JN0-636 Exam Practice Test Questions: https://www.examprepaway.com/Juniper/braindumps.JN0-636.ete.file.html